Products
Coating Lines
Hot-Dip Galvanising Lines
Esmech Equipment Galvanising Lines can deposit a wide range of materials on the steel strip. The materials can be Pickled Hot Rolled Steel, Cold Rolled Steel of CQ, DQ quality & full hard.
Hot-Dip Galvanising Lines
Esmech Equipment Galvanising Lines can deposit a wide range of materials on the steel strip. The materials can be Pickled Hot Rolled Steel, Cold Rolled Steel of CQ, DQ quality & full hard.
Depending on the customer's application and budget, the line may feature:
-
Horizontal or Vertical non-oxidizing type furnace
-
Horizontal or Vertical strip accumulators at entry and exit
-
Edge Trimmers
-
Pre-lap, limited overlap or flash-butt welders
-
Pre-cleaning sections (Alkali or acid)
-
Steel or Ceramic galvanising pots (single, dual or triple-shuttle type)
-
Air or nitrogen coating knives
-
Mini/Zero spangle fixtures (using steam, water/chemicals and zinc dust)
-
Galvaneal furnace
-
Closed-loop coating weight gauges for controlling coating thickness
-
Dip, spray & coater type passivating system
-
Tension levelling sections
-
Skin pass mill
-
Level 1,2 or 3 automation
Colour Coating Lines
Esmech Equipment Color Coating Lines can be simple semi-continuous type with infra-red ovens to high speed continuous lines with a standard catenary and "floater-type" convection oven.
The line can be designed for water or solvent based liquids (Alkyds, acrylics, epoxies, organosols, plasterols, phenolics, polyesters, polyurethenes, vinyls, PVF/PVF-2) for strip thickness of 0.15mm and higher.
Esmech Equipment Color Coating Lines can be simple semi-continuous type with infra-red ovens to high speed continuous lines with a standard catenary and "floater-type" convection oven.
The line can be designed for water or solvent based liquids (Alkyds, acrylics, epoxies, organosols, plasterols, phenolics, polyesters, polyurethenes, vinyls, PVF/PVF-2) for strip thickness of 0.15mm and higher.
Some of the features which may be included, depending upon application are as follows :
-
Vertical and/or Horizontal strip accumulators
-
Edge Trimmers
-
Pre-lap, limited overlap/flash-butt welders or sticher type joining
-
Tension levelling section
-
Alkali and/or acid pre-cleaning systems having spray and removal brush stations
-
Spray or dip type pre-treatment sections and/or "dried-in-place" coaters & driers
-
Vertical & Horizontal or "S" or "T" type configuration coaters
-
Laminators and/or embossers
-
Direct or indirect-fired category or a "floater type" convection ovens, electric or gas fired or infra-red ovens
-
Level 1, 2 or 3 automation
